德国巴斯夫PA6 B3M6

东莞市晶宏塑胶原料有限公司销售纯树脂耐高温PA6，加纤耐高温PA6，阻燃耐高温PA6，无卤阻燃耐高温PA6，抗紫外线PA6，加纤抗紫外线PA6，自熄阻燃耐高温PA6，食品级PA6，质料级PA6；供应品牌：基础创新塑料/PA6、美国杜邦/PA6、日本三菱工程/PA6、法国罗地亚/PA6、日本东丽/PA6、日本东洋纺织/PA6、日本宇部/PA6、 德国DOMO/ PA6、德国朗盛/PA6、德国巴斯夫/PA6、荷兰/ PA6等、品种齐全，原厂原包，量大从优！
工业中的应用：聚酰胺玻纤增强材料可根据产品的特要求添加玻纤含量在5-60%的范围，这类材料具有很好的强度、耐热能、优良的抗冲击能、良好的尺寸稳定及低翘曲等。工业生产中泛用于制造轴承、圆齿轮、凸轮、伞齿轮、各种滚子、滑轮、泵叶轮、风扇叶片、蜗轮、推进器、螺钉、螺母、垫片、高压密封圈、耐油密封垫片、耐油容器、外壳、软管、电缆护套、剪切机滑轮套、牛头刨床滑块、电磁分配阀座、冷陈设备、衬垫、轴承保持架、汽车和拖拉机上各种输油管、活塞、绳索、传动皮带。

The mold temperature of PA6 processing is 80-90 ℃, and the mold temperature has a significant eff on the crystallinity, which in turn affs the mechanical properties of pstic parts. The crystallinity is very important for structural parts, so it is recoended that the mold temperature be 80-90 ℃. For thin-walled and long process parts, higher mold temperature is also recoended. Increasing mold temperature can improve the strength and stiffness of pstic parts, but reduce the toughness. If the wall thickness is greater than 3 , it is recoended to use a low-temperature die with 20-40 ℃. For gss fiber reinforced materials, the mold temperature should be higher than 80 ℃.

PA6的化学物理特和PA66很相似，然而，它的熔点较低，而且工艺温度范围很宽。它的抗冲击和抗溶解比PA66要好，但吸湿也更强。因为塑件的许多品质特都要受到吸湿的影响，因此使用PA6设计产品时要充分考虑这一点。为了提高PA6的机械特，经常加入各种各样的改剂。玻璃纤维就是常见的添加剂，有时为了提高抗冲击还加入合成橡胶，如EPDM和SBR等。对于没有添加剂的产品，PA6的收缩1%到1.5%之间。加入玻璃纤维添加剂可以使收缩率降低到0.3%（但和流程相垂直的方向还要稍高一些）。

BASF has a long history of trade with China, more than a century ago. As r back as 1885, BASF, which was founded only 20 years ago, has already sold the mous textile dye in to China, making China the most important market of BASF magenta outside Germany. In addition to providing dyestuffs for China, BASF has been expanding its product range. Today, BASF has a wide range of products. The list of products produced by joint ventures or imported into the Chinese market from other pces is simir to a chemical boratory manual. It can fully refl the business scope of BASF: pstics, chemical fiber intermediates, fertilizers, industrial chemicals, fine chemicals and textile and leather chemicals.